電解拋光不銹鋼無縫管 EP管 超潔凈管

       我司采用國外引進的先進不銹鋼電解表面處理技術，確保我司鋼管內表面拋光等級達到客戶的要求.

產品技術指標Product Data:

生產工藝Process Method: 

冷拔/冷軋+光亮退火+電解拋光Cold Drawn / Cold Roll& Bright Annealed & Electro polished

材質Available Material: 

TP304L, TP316L, TP316L-S2, EN 1.4301, EN 1.4404, EN 1.4435, other grades can be offered on request.

標準Standards: ASTM A269, EN 10216-5 TC1

外徑Outside diameter range from 6.35-50.8mm

壁厚Wall thickness range from 0.71-2.77mm

內表面粗糙度: Inner surface roughness can be according to customers' request and reach up to Ra<0.2μm  

應用領域Applicable industries:

Semiconductor, TFT/LCD,

Gas/Bio/Medical Equipment

產品特點Features:

精選優質原材料Selected Raw Materials：

我司選用的母管都是按照我司技術要求定制而來，對316L材質，我們通過控制低的硫含量來提高其焊接的可靠性和一致性。The Mather tubes we choose are customized according to our technical requirements, our 316l tubes are manufactured from specially selected mother pipes, controlled lower content of sulfur levels to promote reliable, consistent welding.

超潔凈清洗Chemically And Ultra High Purity/UHP Cleaned:

我們的超潔凈管通過高精度清洗（18MΩ 的超純水）后以高純度氮氣（99.9995%濃度）沖吹凈化管道，并在管內充填，最后在10級無塵室包裝。Our UHP tubes &pipes are rinsed with 18MΩ di water and purged with 99.9995% filtered nitrogen and are packed in an class 10 cleanroom.

可追溯性和潔凈包裝Traceability and Clean Packaging:

每一根管子都進行噴碼，包括制造商、材料類型以及加熱編碼等信息。 EP管通過如下方式包裝：末端和首端裹上PA薄膜，橡膠保護帽封口后， EP管用雙層防靜電袋包裝。Each tube is marked to identify manufacturer, material type and heat code. BA&EP grade tubes & pipes are packed as following manner: ends are faced and protected with polyamide nylon film and polyethylene caps, packed in single (BA grade) or double (EP grade) polyethylene bags.

專業的檢測設備Professional Inspection Equipment:

我們有多種專業的檢驗設備：掃描電子顯微鏡、能譜儀、粗糙度儀、粒子計數器、硬度計、露點儀、金相顯微鏡、拉力試驗機等。We have a variety of professional inspection equipment: Scanning Electron Microscope（SEM）,Energy Dispersive Spectroscopy（EDS）, Surface Roughness Gauge, Particle Counter, Micro Vickers, Moisture Analyzer, Metallographic Microscope, Tensile Testing Machine etc.